Anthra W15 Subwoofer Hi-Fi Monitor Audio - Unit

Setting
Active – Hermetic Enclosure

Speakers Used
1 381 mm (15") Triple Suspension transducer designed for large displacements

Internal Amplifier Type
High efficiency class D

Lower Cutoff Frequency Limit
-6dB @16Hz

Upper Cutoff Frequency Limit
(LPF Off) -6dB @400Hz

Maximum Transducer Excursion (peak to peak)
50mm

DSP
28 bit/50 MIPS configurable via MaestroUnite

Analog to Digital Conversion
Auto-select input combining a maximum input signal of 10 Vrms with high signal-to-noise ratio for low-level signals

Amplifier Output Power, 240 V AC
Instantaneous: 2,500 W*
Short-term continuous: 1,400 W**

Amplifier Output Power, 120 VAC
Instantaneous: 2,500 W
Short-term continuous: 1,400 W

LED UI Control
Brightness Level, On-Off

Phase Control
0-360 degrees measured at LPF cutoff point

Low Pass Filter
LPF adjustable between 20 and 200 Hz with adjustable cutoff slope from -3 to -48 dB/octave

Customizable EQ
Configurable via MaestroUnite; 3 preset EQ curves plus 3 customizable EQ curves, each with 8 bands and support for Peaking, High Shelf, Low Shelf and High Pass options

Volume Level
Widely adjustable input gain to allow maximum output level with a wide variety of input signals

Tickets
Unbalanced Stereo with RCA connectors (or LFE mono using the connector marked LFE) and Mono/LFE with XLR connector

Departures
Unbalanced stereo outputs with direct routing from RCA Inputs
Mono/LFE Balanced XLR Outputs with direct routing from the XLR Input

Supply Voltage
Universal, 85-265 VAC

External Dimensions (without feet) (H x W x D)
439 x 439 x 439mm

Energy consumption
550W

Construction of the Campus
25mm thick MDF panels with internal reinforcements and 36mm thick front panel

Protective Grille
Fabric covered and with magnetic fixation

Weight
35.41kg

*Maximum RMS output for instantaneous signal
**Sinusoidal signal for 10 seconds